I checked with SnowBear and the correct bracket kit for a 2013 Jeep Wrangler Unlimited Rubicon with 4-wheel drive and the standard factory bumper is the Custom Mounting Bracket Kit # SB397-101.
This kit is designed to fit SnowBear Hydraulic or Winter Wolf snow plows though if you let me know the model number of your plow I can check with SnowBear for compatibility. view full answer...
Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity. view full answer...
Both the Curt # 31408 and Draw-Tite # 65048 mount to the top of the bumper as you referenced. I believe you are correct that the hitch mounted snow plow won't work with these, because both SnowBear and Detail K2 snow plows we carry all use custom brackets versus a front hitch for your vehicle.
I've linked the page to the snow plows compatible with your vehicle and all the SnowBear plows use the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-024. view full answer...
Trailer hitch and snow plow manufacturers do not test their products on vehicles that have been modified with aftermarket parts. Therefore, I would not be able to confirm fitment of a front mount trailer hitch or snow plow on your 2007 Jeep Wrangler. Your best option in order to attach a snow plow to the vehicle would involve putting the stock Jeep bumper back on. There is a very small likelihood that the snow plow would clear the front bumper assuming that the hitch fits.
If you install... view full answer...
To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part # C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow # SB324-080 which is 82" wide x 19" tall and comes with an electric winch to raise and lower the hitch.
The last time SnowBear made a custom mount for their WinterWolf snow plows for a GM truck application was for the 2018 model year which is why you'll have to switch everything... view full answer...
Since you have a SnowBear plow that uses the 5XM5 Universal Cross Member # SB324-060 you just need the Custom Mounting Bracket Kit # SB397-051 for your 2005 Chevy Colorado. This provides you with the 2-point brackets needed to mount your SnowBear snow plow. view full answer...
I do have a front mount hitch and snow plow compatible with your 2016 Ram 3500 but according to American Expedition Vehicles (AEV), there is not a front mount trailer hitch compatible with the AEV front bumper installed on your vehicle therefore, you would not be able to use a snow plow on the Backcountry edition of your 2016 Jeep Wrangler.
For a snow plow and front mount hitch setup for your Ram, I recommend using both the Curt Front Mount Trailer Hitch Receiver part # C31067 and the... view full answer...
The Replacement Angle Hose Kit for Meyer Hydraulic Snow Plows # 3371304060 will work for your Meyer E57 snow plow as long as it uses the standard 1/4" NPT hose fittings. view full answer...
I do have plow options for you but I spoke with my contact over at Snow Bear and they have not yet confirmed a custom snow plow mount kit for the 2017 GMC Sierra 1500 (March 1, 2017).
What you can do is use a plow that attaches to a front mount trailer, # C31069, which does fit your truck. With the front mount hitch installed you could then use Snow Bear plow # SB324-172, # SB324-081, # SB324-080, # SB324-168, or # SB324-140. view full answer...
There is a front-mounted trailer hitch that fits your 2019 Ram 2500 (non-Diesel models) that doesn't require modification to your truck, and will work with a hitch-mounted snow plow. I was unable to find a Fisher X2 model snow plow to see if it was hitch-mounted or frame mounted, but as long as it is hitch-mounted it will work:
- Draw-Tite Front Mount Trailer Hitch Receiver # DT36MR
There isn't a front hitch that will install in your '19 Ram 2500 if you have a frame-mounted snow plow,... view full answer...
The SnowBear ProShovel SnowPlow mounts using a standard 2" receiver tube according to my research therefore in order to use this on a 2009 Chevrolet Silverado 1500 you only need the Curt Front Mount Trailer Hitch Receiver part # 31322 which is a drill free option that can be used for several other purposes when you are not plowing such as helping back-up a trailer, mounting a winch, etc.
If your SnowBear SnowPlow does not mount using a standard 2" receiver tube then please re-verify the model. view full answer...
The matching part to the Replacement Harness for Fisher and Western Snow Plows - 9-Pin Male Plug # 3371315310 is the Replacement Plow Harness for Fisher and Western Snow Plows - 9-Pin Female Plug # 3371315315. view full answer...
The Replacement Snow Deflector # 3371309015 is designed for a Meyer Snow Plow Model C-7.5, C-8, C-8.5, M-9, or M-10. The deflector itself measures 120" long x 9" tall x 3/8" thick. We cannot confirm fitment for a Fisher plow, but it may be a suitable replacement as long as the current deflector is the same size. view full answer...
I do have an option for you but I checked with SnowBear and they only offer Custom SnowBear SnowPlow Mounting Bracket for a Chevrolet Colorado up to 2018. That said, you may be able to switch to the hitch mount type of attachment which is much more versatile. In which case, you'd need the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120. In order to confirm, you'd need to make sure your dowel's are spaced apart 33". If so you can use the Draw-Tite Front Mount Trailer Hitch... view full answer...
You should have no issues using the Curt High-Low Adapter # C27KR with your SnowSport LT. This adapter has quite a bit of capacity at 7,500lbs which will be more than enough for your snow plow.
Keep in mind that this product should not be used to tow a trailer. view full answer...
The parts are different and cannot be interchanged; an angled cylinder simply angles the blade, while the lift cylinder like # 3371304203 you mentioned will raise it vertically.
The part you mentioned is for a Western Hydraulic snow plow, and for an angled cylinder we have the Replacement Angle Cylinder for Western Hydraulic Snow Plow - 10" Stroke - Single Acting # 3371304202 which is equivalent to to Western part number 56614. view full answer...
We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall. view full answer...
Yes the Draw Tite front hitch part # 65080 is strong enough to be used with a hitch mounted snow plow like the Detail K2 part # K2AVAL8219. view full answer...
Yes, we have a couple of options for front mounted hitches and snow plows as well. Both the Curt # C31078 and
# 65076 are great options for mounting various accessories and look great as you can see from the attached Curt example.
The SnowBear Personal Snowplow for 2" Hitches # SB324-081 is an excellent choice of snow plow too if you are still evaluating your options. A confirmed fit for your 2020 Ford F-250 Super Duty, this snow plow has a 5-position adjustable blade and a remote-controlled... view full answer...
If you have a Fisher or Westin snow plow, all you need to get is this remote # 3371306902 as it will just plug right into the winch harness. If you don't have a plow that's compatible with the remote, you won't be able to add the remote. view full answer...
Go To Results